ITEEA

Safety Tests

Additional Resources

Teacher Resources

Contact Info


CNC Machines Safety Test

Directions:
Read each statement carefully and decide if it is True or False. Be sure to answer all questions. When finished, enter your FIRST AND LAST NAME along with your teacher's email address and click the submit button.

1. Make all adjustments with the power turned on.

2. Check spindle speed and depth of cut before starting the operation.

3. Just hit start without a simulation or dry run.

4. Leave tools in the work area.

5. Eye protection with ANSI Z87.1 markings should be worn.

6. Leave the doors open during operation.

7. Remain with the machine until the operation is complete.

8. If a malfunction occurs, let the machine continue to run.

9. Securely clamp the work piece.

10. Brush away chips and dust while the machine is running.


Read the following information, check the I agree box, fill in your name and instructor's email, then click the submit button to send the test score to your instructor.

I acknowledge that by submitting this form I am confirming that I am the person who's name is entered below. I further acknowledge that I did not use any resources or receive any assistance during the completion of this test.

I Agree

Your name:

Instructor's email:


Created by Tyler S. Love

Copyright © 2000/2006/2014 by the International Technology and Engineering Educators Association. All rights reserved. Except as permitted under the United States Copyright Act of 1976, no part of this publication may be reproduced or distributed in any form or by any means, or stored in a database or retrieval system without the prior written permission of the publisher.