Safety Tests

Additional Resources

Teacher Resources

Contact Info

Miter Saw Safety Test

Using the drop down menus, select the correct part name that each arrow is pointing to on the machine. Be sure to select a name for each part. Do not use the same part name twice.







Read each statement carefully and decide if it is True or False. Be sure to answer all questions. When finished, enter your FIRST AND LAST NAME along with your teacher's email address and click the submit button.

6. Make sure all guards are in place and working at all times.

7. Inspect material for any foreign objects (nails, staples, etc.) before cutting.

8. Make blade adjustments with the saw turned on.

9. Make sure the stock is held firmly against the fence and the table before cutting.

10. Keep hands away from the cut line and blade.

11. Ripping (cutting with the grain) is allowed on this machine.

12. Do not start the blade while it is touching the stock.

13. Wait for blade to reach full speed before beginning to cut.

14. Remove scraps and stock while the saw blade is still spinning.

15. It is ok to leave the machine before it has come to a complete stop.

Read the following information, check the I agree box, fill in your name and instructor's email, then click the submit button to send the test score to your instructor.

I acknowledge that by submitting this form I am confirming that I am the person who's name is entered below. I further acknowledge that I did not use any resources or receive any assistance during the completion of this test.

I Agree

Your name:

Instructor's email:

Created by Tyler S. Love

Copyright © 2000/2006/2014 by the International Technology and Engineering Educators Association. All rights reserved. Except as permitted under the United States Copyright Act of 1976, no part of this publication may be reproduced or distributed in any form or by any means, or stored in a database or retrieval system without the prior written permission of the publisher.